Maintenance schedule
4 & 6-cylinder front-wheel drive vehicles (2016 +)
It is recommended that this maintenance service be carried out every...
Service #1: 16,000 kilometres from the time your vehicle has travelled 8,000 kilometres.
Service #2: 32,000 kilometres from the time your vehicle has travelled 16,000 kilometres.
Service #3: 32,000 kilometres
Replace Super Long Life Coolant: 80,000 kilometres from the time your vehicle has travelled 160,000 kilometres.
Brake Fluid Replacement: 48,000 kilometres
Replace Iridium Spark Plugs: 192,000 kilometres
4-cylinder all-wheel drive vehicles (2016 +)
It is recommended that this maintenance service be carried out every...
Service #1: 16,000 kilometres from the time your vehicle has travelled 8,000 kilometres.
Service #2: 32,000 kilometres from the time your vehicle has travelled 16,000 kilometres.
Service #3: 32,000 kilometres
Replace Super Long Life Coolant: 80,000 kilometres from the time your vehicle has travelled 160,000 kilometres.
Brake Fluid Replacement: 48,000 kilometres
Replace Iridium Spark Plugs: 192,000 kilometres
Replace Transfer Case Fluid: 48,000 kilometres
6-cylinder all-wheel drive vehicles (2016 +)
It is recommended that this maintenance service be carried out every...
Service #1: 16,000 kilometres from the time your vehicle has travelled 8,000 kilometres.
Service #2: 32,000 kilometres from the time your vehicle has travelled 16,000 kilometres.
Service #3: 32,000 kilometres
Replace Super Long Life Coolant: 80,000 kilometres from the time your vehicle has travelled 160,000 kilometres.
Brake Fluid Replacement: 48,000 kilometres
Replace Iridium Spark Plugs: 192,000 kilometres
Tighten Rear Drive Shaft Nuts: 16,000 kilometres
Tighten Propeller Shaft Bolts: 16,000 kilometres
8-cylinder RWD vehicles (2016 +)
It is recommended that this maintenance service be carried out every...
Service #1: 16,000 kilometres from the time your vehicle has travelled 8,000 kilometres.
Service #2: 32,000 kilometres from the time your vehicle has travelled 16,000 kilometres.
Service #3: 32,000 kilometres
Replace Super Long Life Coolant: 80,000 kilometres from the time your vehicle has travelled 160,000 kilometres.
Brake Fluid Replacement: 48,000 kilometres
Replace Iridium Spark Plugs: 192,000 kilometres
Tighten Rear Drive Shaft Nuts: 16,000 kilometres
8-cylinder all-wheel drive vehicles (2016 +)
It is recommended that this maintenance service be carried out every...
Service #1: 16,000 kilometres from the time your vehicle has travelled 8,000 kilometres.
Service #2: 32,000 kilometres from the time your vehicle has travelled 16,000 kilometres.
Service #3: 32,000 kilometres
Replace Super Long Life Coolant: 80,000 kilometres from the time your vehicle has travelled 160,000 kilometres.
Brake Fluid Replacement: 48,000 kilometres
Replace Iridium Spark Plugs: 192,000 kilometres
Lubricate Propeller Shaft: 16,000 kilometres
Tighten Rear Drive Shaft Nuts: 16,000 kilometres
Click here to get your personalized maintenance schedule
_____________________________________________________________________________________________________________________________________________________
Services description
Service #1
- Check installation of driver's floor mat.
- Reset Maintenance Reminder Light or system.
- Inspect all lights and horn for proper operation.
- Inspect wiper blades, linkage and washers for proper operation.
- Inspect and adjust level - engine oil, brake fluid, engine/inverter coolant, power steering fluid and washer fluid.
- Remove & inspect engine air filter.
- Remove & inspect cabin air filter.
- Check and record tire tread depth. Examine tires for damage and uneven wear.
- Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
- Rotate tires (applicable to same size wheels, front & rear)
- Record inspection results, measurements and component condition on inspection form and/or repair order.
Service #2
- Check installation of driver's floor mat.
- Reset Maintenance Reminder Light or system.
- Inspect all lights and horn for proper operation.
- Inspect wiper blades, linkage and washers for proper operation.
- Visually inspect drive belts.
- Replace engine oil & filter (synthetic).
- Lubricate locks, latches and hinges.
- Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
- Remove & inspect engine air filter.
- Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
- Check and record tire tread depth. Examine tires for damage and uneven wear.
- Rotate tires (applicable to same size wheels, front & rear)
- Inspect differential and transfer case vents for obstruction.
- Record inspection results, measurements and component condition on inspection form and/or repair order.
- Remove & inspect cabin air filter.
Service #3
- Check installation of driver's floor mat.
- Reset Maintenance Reminder Light or system.
- Inspect all lights and horn for proper operation.
- Inspect wiper blades, linkage and washers for proper operation.
- Visually inspect drive belts adjust tension if required.
- Replace engine oil & filter (synthetic).
- Lubricate locks, latches and hinges.
- Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
- Remove & inspect engine air filter.
- Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
- Remove brake calipers and/or brake drums. Inspect and measure brake rotors, drums, pads and shoes.
- Check and record tire tread depth. Examine tires for damage and uneven wear.
- Rotate tires (applicable to same size wheels, front & rear)
- Perform 12 Volt battery service and comprehensive electrical charging system evaluation.
- Inspect valve clearance (audibly).
- Check steering gear, linkage and shock absorbers for looseness, damage or leakage.
- Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage.
- Inspect fuel system for leaks or damage, inspect condition of fuel tank band, fuel tank cap gasket, fuel tank vapour vent system hoses, fuel lines and connections.
- Inspect engine oil cooler lines and automatic transmission cooler lines if equipped for leakage, looseness or damage.
- Inspect exhaust system for leaks, damage or broken hangers.
- Record inspection results, measurements and component condition on inspection form and/or repair order.
- Remove & inspect cabin air filter.